DVS Clipster User's Guide download pdf (Page 75)

5-2

Manual Creation of a DCP

5.1 Creating a DCDM Manually

This section describes how to create a DCDM from a DSM. For further

information about this delivery type see section “Digital Cinema Distri-

bution Master (DCDM)” on page 2-3:

 Prepare the DSM as described in section “The Steps to Prepare a

DSM” on page 2-7.

 Afterwards call up the finalize dialog of the DVS software (menu

Project » Finalize…).

 Choose a name and storage location for the finalized files according

to your project’s needs. To set the file name(s) you can also use a

variable naming with the button NAME OPTIONS….

Figure 5-1: File name and storage location

 As the file format select the TIFF file format with the file type

16 bit RGB big endian.

 Make sure that the hardware finalize support is activated.

Figure 5-2: File format settings

As specified by SMPTE/DCI the DCDM has to be saved in X’Y’Z’ in the

TIFF file format. However, the TIFF file format natively does not store

the X’Y’Z’ color space: It saves the RGB or Luma color space only. To

make this work nevertheless, a 3D look-up table (LUT) has to be ap-

plied to the DSM material which will then create the X’Y’Z’ color space

compliant with the specifications:

 To convert the DSM to X’Y’Z’ select the 3D LUT appropriate for

your project’s material with the button 3D LUT… ().

For this you may use one of the available 3D LUTs provided by

DVS.

For some particulars about the creation of a DCDM see section

“Color Space Conversions” on page 6-5.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 112 113

No comments

DVS Clipster User's Guide Page 75